News:

SMFNew Installed

  3. 6.5 grendel
« previous next »
Pages: [1]

Author Topic: 6.5 grendel  (Read 1410 times)

0 Members and 11 Guests are viewing this topic.

6.5 grendel
« on: »
This is another cartridge I play around with. I have a howa mini chambered in it. I've stiffened the fore end of the stock with epoxy resin and its now got custom bottom metal on it. Before that I did a mod to the bottom plastic to stop it squashing when trying to tighten it up. Here's some loads I've tried in it to date.
90gr speer tnt 32gr cfe223 2584fps
120gr speer gold dot 31gr 748 2670fps
85gr sierra hp 30.2gr 2219 2965fps
85gr sierra hp 31gr win748 2700fps this is the load I run in this rifle.
I'm using hornady brass but I'm finding I'm getting a lot of split necks after about the third firing. I've got some starline brass to try and also bought an annealing machine. Best groups are with the last load and the gold dots
Logged

Share on Bluesky Share on Facebook

Re: 6.5 grendel
« Reply #1 on: »
Tried it today with some hornady factory 123gr sst. didnt shoot to bad 1.5' at 100 off a bipod.
Logged
Re: 6.5 grendel
« Reply #2 on: »
loaded up a batch for the grendel today that had been through the annealer. Not being too scientific but in my job you have to have a good feel for mechanical things and the seating pressure required felt very consistent. Now to see If I get less split necks..
Logged
Re: 6.5 grendel
« Reply #3 on: »
Split necks are caused by overworking brass. While annealing removes the stress, a loading program that moves the brass the least can make life easier.
A Lee Collet die is what you need, if they make one for this cartridge.
Logged
Re: 6.5 grendel
« Reply #4 on: »
No they dont. I did think of buying a hornady neck sizing die and cutting it shorter as the grendel case is to short to reach the sizing part.
Logged
Re: 6.5 grendel
« Reply #5 on: »
Neck Sizer 6.5 Grendel
Lee 6.5 Grendel Collet necksizing die uses a steel collet to squeeze fired case to a precision mandrel, creating a precisely aligned case neck while reducing run out. Results in best accuracy and e...
Lee Precision, Inc. · leeprecision.com
Logged
Re: 6.5 grendel
« Reply #6 on: »
I better give reloaders a call. They were waiting for some lee stuff to arrive last time i was talking to them
Logged
Re: 6.5 grendel
« Reply #7 on: »
They dont have any :'(
Logged
Re: 6.5 grendel
« Reply #8 on: »
Lee 6.5 Grendel Collet Die Set #91606
Shop for a high-quality Lee 6.5 Grendel Collet Die Set #91606 from Reloaders Supplies NZ.
reloaders.co.nz
Logged
Re: 6.5 grendel
« Reply #9 on: »
I mentioned that there was dies on their site when I rang today but they are all gone. I think the lee dies are specific to each caliber. Got one for my 6.5x55 and one for my 22 hornet they are good dies.
Logged
Re: 6.5 grendel
« Reply #10 on: »
So I rang back today and got a different guy and also got a collet die set. Thought Id try again as the guy I was talking to yesterday sounded a bit vauge on it..
Logged
Re: 6.5 grendel
« Reply #11 on: »
Logged
Pages: [1]
« previous next »
  3. 6.5 grendel